Even the rails are independent so if something happens with a rail (ground explosion or cable burnt) you lose only that rail and not the entire module. With this approach it does not matter what happens with other modules or if interferences occur in the network. fireTEK modules are fully independent and they run a script from their internal memory. fireTEK modules save checks when powered on and every 3 seconds all critical components need to fire and report if any issue occurred. fireTEK it is the only system able to check in real time if a current channel is fired and increase open time until it fires or the maximum time is reached. Users can do all checking on the field only with the module powered on. fireTEK module status can be easily read directly from a remote screen (same screen you see on the module) or from the module screen without being necessary to power the controller to check for errors. This way when you press Start you are sure you will not have a black sky and all modules will be firing. After you press start, firetek controller sends every 3 seconds a sync message to modules so if one of them missed the start command it will start fully synchronized every 3 seconds. After arming the system, firetek controller automatically rechecks all modules status: if they are really armed, if they have enough power to fire, if communication is OK, if the module is ready to fire or if other critical issues occurred. Think about how much time you need to detect errors in your current system and how many buttons you need to press. This happens in cycles, fully automatic so if an error occurs, such as a disconnected cable or igniters, module not responding, low battery, you will find out about it in about 10 seconds. ![]() what it is connected, battery levels, communication problems, other critical errors are detected and reported. ![]() This report includes: script errors - what it is in the script vs. 10 seconds - this is the time a firetek controller needs to interrogate up to 99 firing modules (6336 independent channels) via wireless and/or wired, detect and report errors in one screen, easy to identify. fireTEK automatically tests and reports any error in real time. We are trying to find out especially what they do not like so that we can come up with improvements. We are open minded and always listen to the clients suggestions and always ask for feedback from them. ![]() When others prefer to say the fault was on the user because he made a mistake and they do nothing else, we try to find solutions so that any problem is avoided and the user does not repeat a mistake. We always try to find solutions to problems that may appear in the field and to avoid errors made by the users, which may have as a result a show fail or even a life loss. fireTEK guarantees a faster and easier setup/dismantle, fast error detection, backup solutions for possible issues you may encounter in the field and of course 100% fire all the time with a minimum check list (based on clients feedback and fails which are system fault). In our goal to becoming number one we focus on details so that we can offer to the user a system with high safety standards, flexibility, time and money saving and with new innovative features. There is a lot of firing systems on the market and all can be used to make a show so only details make the difference. Try it and you will like it, Understand it and you will love it. Now we have more than 1000 clients located in more than 50 countries. We started developping the firing system in 2009, the first one was released in 2012 and ever since we continued growing and innovating.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |